TopFrame
Stoddard Silencers specialists in industrial silencing
Header4 HOME Header6 ABOUT US Header8 PRODUCTS Header10 QUOTE REQUEST Header12 CONTACT US Thursday, March 28, 2024
Home > Products > Air Intake Filters and Filter Silencers > F11 Series
TopLeftCorner TopRightCorner
 
F11 Air Intake Filters and Filter Silencers

F11 Series
Air Intake Filters and Filter Silencers

Application
The F11 Series Filter, employing a dry type filter element, is recommended for use on the inlet of all rotary positive blowers. Normally, it is used in series with the intake silencer and is mounted on the inlet silencer flange.

Design
Simple plenum-type housing with filter elements on 1, 2, 3 or 4 sides as required. The filter element is a F2 type, for minimum maintenance and maximum dirt holding capacity. Element efficiency is 99% on 10 microns and above. Other type elements are available on request. Weatherhoods are included with filter housing.

Construction
Welded heavy-gauge steel sheet — prime coated, followed by a final coat of machinery enamel. Bolt hole drilling matches 125 lb. American Standard Flanges.

Part No.   Figure Blower Inlet CFM Filter Size Filters A Q C S Wt.
F11-4   1 480 16 x 20 1 4 1618 2018 17 27
F11-5   1 750 16 x 20 1 5 1618 2018 18 27
F11-6   1 1075 20 x 25 1 6 20¼ 25¼ 24 45
F11-8   2 1875 20 x 25 2 8 20¼ 25¼ 36 57
F11-10   2 4950 24 x 24 2 10 24¼ 24¼ 40 69
F11-12   3 4250 24 x 24 3 12 37 24¼ 50 88
F11-14   4 5400 24 x 24 4 14 50 24¼ 50 118

 

 
Print this Page Print this pageDownload PDF File Download PDFBookmark this Page Bookmark this PageRequest a Quote Request a Quote
 
BottomLeftCorner   BottomRightCorner
 

 

Copyright © 2024 Stoddard Silencers, Inc. All rights reserved. Site developed by Cubital, LLC